Two questions: Electric windows and mounting an amplifier.

[Gazza_DJ]

:wave:

Ok, i installed a sub and amp yesterday, and i disconnected the battery while i was doing it. now, my electric windows do not go down all the way when you press the switch, you have to hold with switch down to make the window continue going down.
Its most likely related to disconnecting the battery, so how do i go about resetting it back to how it was?

also, i want to mount my amplifier on the back of the seat. would this be relatively easy to do?

thanks!

[yatesey_boi_4321]

yer mine have done this before go for a drive and this might reset them, and if that still doesn't work roll down the windows and hold the switch down for about 10 seconds as this will reset them hopefully...can't answer ur question about your amp tho, not much of an ice expert

[charlton_68]

Press the switch so your window goes up, once its up keep hold of it for around 10secs :yes:

As for mounting the amp, just get some screws and srew it into the seat :yes:

[Gazza_DJ]

thanks guys. Just some self tapping screws then?

[charlton_68]

thanks guys. Just some self tapping screws then?

yer, they'll be fine :yes:

[Gazza_DJ]

wicked. My course tutor is off ill tomorrow as well, so i can get that done before work :)