Rimstyle Angel Eyes Problem!!

[jonnygearbox]

I have the ultra black angel eyes for my corsa...anyway i was trying to adjust the drivers headlight as it was really low....i was told it was the little screw bolt at the top....i was turning it and turning it and the lights did not move....i then tapped the headlight and i noticed the projecter bit shook about....it the adjuster broken and how do i go about fixing it....and will rimstlye cover it?

[Sam]

surely this would be covered by warranty. I mean, its a defective unit right? unless youve unscrewed so much youve taken it apart? lol

[jonnygearbox]

naw i haven't screwed it way out i screwed it in first....it did not move....then out abit....it did not move...:(

[Sam]

Hmm its prob a fault with the unit

mine should be coming this week and i figured i will have to allign then. I hope i dont have this problem

I hope you get it sorted

[jonnygearbox]

iim going to ring rimstyle on tuesday...anyway im off to bed ill have a look at them tomorro :)

[Gravesie-363]

Your makin the same mistake i did mate!! Its not the bolt.

You wil see a little ring with teeth on towards the outer part of the unit. Put a large posi screwdriver or even better a torx bit!! and turn it, this will adjust the beam up and down!!!

PM me if you have any problems!!

[jonnygearbox]

if that is the answer then that means i dont have to pull the airdam off :) ill have a bash in a while dude :) what does the bolt do lol

[Jak113]

I adjusted mine yesterday to align my HID's and tis indeed the wheel with teeth on it. It will move very slowly, but it does move, best to do at dusk so that you can have a crack with it shining against a wall/garage! The bolt is irrelevant for the alignmnet process, and no the dam does not need to come off as it accesible with the bonnet lifted! Happy aligning

[jonnygearbox]

thanks for the help people :)

[vicious-monkey87]

if that is the answer then that means i dont have to pull the airdam off :) ill have a bash in a while dude :) what does the bolt do lol

from looking at the pics from yesterday, your airdam sits a bit low on the left side and creates a gap between bumper and headlight! you should take it back to whoever fitted it and get them to sort it!
cars looking good tho mate!

[jonnygearbox]

yeah i seen that....im going up tomorro nyt :)

[jonnygearbox]

i adjusted them using the little disc thing but it did not go a high as the other light how do i get it to go higher now...i used the little disc and i was moving it and the light moved way up but it does not going any higher now :( and it not as high as it should be

[Gravesie-363]

I have the same problem, my passenger side beam is a little lower than my drivers side and will not adjust, just have to live with it i think :(

[jonnygearbox]

so i wont adjust up any more?

[Gravesie-363]

It might do, just keep trying, i rounded mine off a little because i used the wrong size screwdriver at first !!!

[jonnygearbox]

lol i done the same lol :( lol