25mm Hole Cutter

[Jayesh_SXi]

Where can i able to find 25mm hole cutter? B&Q has two part which cost me over tenner :?

[flash22]

what you trying to put a hole in if its wood,fibreglass or soft alloy you can use a spade bit around 2-3 quid each. metal or steel either a cone cutter (4-5 quid) or a hole saw as you know there pricey (i got a hole saw set on a company account 12 pieces was 60 odd quid). try flea bay you may get a cheap one there

edit. el-chepo hole saw nothing special but will do the job

http://cgi.ebay.co.uk/DISSTON-ONE-PIECE-HOLE-SAW-1-25mm-DIAMETER-HOLESAW_W0QQitemZ180174638840QQihZ008QQcategoryZ12 1892QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1 247QQcmdZViewItem

ps.If your drilling steel while drilling spray the drill bit with wd40 as it will stop you burnning the bit out.

[Jayesh_SXi]

i only use it to cut the hole headlight cover to feed the hid wires through :) so link that you send will help to cut the plastic?

[flash22]

yes it should take your time drilling tho

[Jayesh_SXi]

cheers mate :D

[Jak113]

If ur going in to the facelift headlight cover (the white one) a cheap 25mm wood cutter will surfice as the plastic is thin

[Sam]

lol narr forget all this

drill a hole, then get sum pliars and cut away at it carefully. easy enough to do. I did this yesterday on Smithys corsa

[Jason]

about £4 from screw fix, need the drill bit and adaptor

[Jayesh_SXi]

got it from the link....4 quid and hope it will work ;)