Before I proceed with my angeleyes, How do I earth properly

[Kiz]

Hi i need to make sure that I am wiring up my angeleyes properly, ive read the tutorial several times, ive fitted my lights now i want the halos to work as my sidelights.


Do I?

Crimp all 3 red wires together and put into a connector

THEN

cut the white wire (side light) and use the white wire into the connector of the 3 red wires. (so now we have the 3 red wires running into the white wire)

I then crimp the 3 Black wires into a connector then use a plain wire from my toolbox and connect it onto a metal part of the car? to earth it?


Is that right?

Thanks

[pugh125k]

connect all red wires together & black wires together, if uve got the right conector u dnt need to cut white wire just crimp the red & white together http://cgi.ebay.co.uk/PK-OF-100-BLUE-SCOTCHLOCK-CONNECTOR-ELECTRICAL-TERMINAL_W0QQitemZ360035848112QQihZ023QQcategoryZ3 0928QQssPageNameZWDVWQQrdZ1QQcmdZViewItem as for the black what i did was under the light make a small hole , strip some of the paint off & wrap the black wires round a screw & tighten!

[Kiz]

thxx! i just found some them in my shed and i was just outside in my car in the cold and dark and managed to do them well one worked turned out i knocked the black connector on the other side but anyways they look well good! cheers