sammysxi
27-11-2005, 00:02
Guys just popping a wee warning regarding a trader in livingston.
TUNING ZONE SCOTLAND.
i had went to them to get a second back box fitted to my vectra( this was off another vectra that had an irmy box fitted so was as new) and asked them to supply and fit a y piece to make them fit.
the results were rubbish basicly they just pit a load of weld on and it looked like a dogs dinner. one side stuck out too far and sat way too low. i complained and they said they would adjust it but had done the best they could with no standard parts. pish as i say came straight off another veccy. i decided to put it down to a bad experience as i didnt trust them to go near car again. this was in end july.
i went today to another place in fife that had been reccomended to me and they were great fitting a proper y piece and new pipework but only today did i discover just how bad a job the other cowboys did so thought i would post a few pics up to warn others.
www.forum.vectra-c.com/showthread.php?t=3517
not great pics but you get the idea.
TUNING ZONE SCOTLAND, HOUSTON INDUSTRIAL ESTATE, LIVINGSTON, WEST LOTHIAN. One to avoid.
MVM performance Cairneyhill near dunfermline done a great job rectifying this and were actually cheaper as well. no hesitation in reccomending them.
Sorry for rant just hope this helps stop some other poor sod getting sub standard work done and yes i will be contacting trading standards.
TUNING ZONE SCOTLAND.
i had went to them to get a second back box fitted to my vectra( this was off another vectra that had an irmy box fitted so was as new) and asked them to supply and fit a y piece to make them fit.
the results were rubbish basicly they just pit a load of weld on and it looked like a dogs dinner. one side stuck out too far and sat way too low. i complained and they said they would adjust it but had done the best they could with no standard parts. pish as i say came straight off another veccy. i decided to put it down to a bad experience as i didnt trust them to go near car again. this was in end july.
i went today to another place in fife that had been reccomended to me and they were great fitting a proper y piece and new pipework but only today did i discover just how bad a job the other cowboys did so thought i would post a few pics up to warn others.
www.forum.vectra-c.com/showthread.php?t=3517
not great pics but you get the idea.
TUNING ZONE SCOTLAND, HOUSTON INDUSTRIAL ESTATE, LIVINGSTON, WEST LOTHIAN. One to avoid.
MVM performance Cairneyhill near dunfermline done a great job rectifying this and were actually cheaper as well. no hesitation in reccomending them.
Sorry for rant just hope this helps stop some other poor sod getting sub standard work done and yes i will be contacting trading standards.