PDA

View Full Version : Possible faulty 6x9's?!


spencer7285
17-01-2006, 13:32
I just recently had my VIBE-QB69's fitted into my stealth shelf and wired up I also have a VIBE-BlackBox I Amp. The problem is when i turn the volume up on my headunit both 6x9's cut out and only my front door speakers are working, when i turn the volume down the 6x9's start working again. I went back the place i got them wired up and they basically said that Vibe are rubbish and the 6x9's are faulty and i should send them back. But i am thinking it might be faulty wiring, any ideas? :? :\

SXi-Dan
17-01-2006, 13:35
could be the wiring cant hadle the current that the amps drawing.

AndyW
17-01-2006, 13:36
sounds like the amps going into protection mode

check all wiring and fuses, and make sure your not trying to out power the 6x9s (running your amp with the gain turned right up)

(oh, and vibe aint that rubbish anymore, bless em)

if you do send em back, ask for a gd set of comps instead of the oval monsters!!

Jameshs_SRI
17-01-2006, 14:09
cheak you have a good earth for the amp

Corsa-Greece
17-01-2006, 17:27
sounds like the amps going into protection mode

check all wiring and fuses, and make sure your not trying to out power the 6x9s (running your amp with the gain turned right up)

(oh, and vibe aint that rubbish anymore, bless em)

if you do send em back, ask for a gd set of comps instead of the oval monsters!!+1...amp going into safe mode!!!nothing serious!!!LooooooooooL