60 mm

[mason]

would it work if i got 195/40r17 tyres on 7 inch rim and down 60mm on standard shocks

[E3 DUG]

im down 40 and it rubs fives up so down and extra 20 mill with no arch work i could se there being a problem, get them cut tho and it would nt scrub

[scott_gibson]

shoudnt really lower it more than 40mm on standard shocks!!! ideally need to uprate the shocks to drop it that low.

[E3 DUG]

just get coilovers

[Phil_T]

I wunt even lower 40mm on standard shocks it fooked mine up and had to uprated em all

[Keith]

agreed - cheaper in the long run to get coilovers.

195/40 or 205/40 tyres will do, as long as u get the 40 bit then the side walls will come right in and won't rub much. The 195 or 205 is the diameter of the tyre and i would recommend getting 205 as 195 are so thin u'll prob buckle ur alloys over a big pot hole or something.

[scott_gibson]

aye,

think coilovers are the way forward matey....

got mine on order should be here next week!!!

[mason]

whts the cheapest place 2 get coilovers now ? how much did u get yours for ?

[mason]

already down 40 but wnt more but dont really wanna spend alot on coilovers like

[R14lST]

if u are on standard shoks and its et45, u wont get any rubbing