corssover trouble

[h20490]

bought the vibe components and fitted them to my car without the components and I would like to fit the crossovers but where do I put them and where do I need to connect them to? and how.

I have a 600W Sony Xplod Amp which is powering a 12" sony xplod sub and my headunit it a sony MEX-R1 .

will my amp be enough to power them with the sub on aswell?

[Martin]

-bought the vibe components and fitted them to my car without the components

-will my amp be enough to power them with the sub on aswell?

what...?

Dont run your comps and sub off of the same amp
Do buy another amp.
Do run the speaker cable from this amp into your cross over input.
Do wire your mid/woofer to the mid/woofer terminals/
Do wire the tweeter to the tweeter terminal on the cross over

Up to you were you put the cross over. If you put the cross over in the door, you only have to get 2speaker cables into the door.
Mount the cross over somewhere in the car, and you must run 4 wires into each door.

[partridge_88]

tape it to the door with gaffa tape and cut a square away in the foam