Head Unit

[Col]

Just got an adaptor so i could use my steering wheel contols with my head unit but when i turn the ignition off the HU goes to standby and has no memory!! do i need to change the wires like i did the origonal adaptor???

[CORSACMATT]

Just got an adaptor so i could use my steering wheel contols with my head unit but when i turn the ignition off the HU goes to standby and has no memory!! do i need to change the wires like i did the origonal adaptor???

Swap the red and yellow wires

[Col]

i have done that on the original block do i need to do it on the new one that lets me use the controls??

[Brownie_Corsa]

you should have got some wires with the hu you bought and you swap the yellow and red wires over on the hu wires.

[Martin]

Also, to keep the date displaying on your MFD, cut the grey/red wire at the ISO block or if you have a long blue wire going to either end of your headunit loom, cut this.

[Col]

I have changed the red and yellow wires and i had no problems with "memory loss" on the head unit before!!

Now I have got another adaptor (autoleads) so my steering wheel controls work. this connects from "CAR-> Steering wheel adpt -> HU Adpt -> HU no when i turn the car on i have memory loss do i need to change the red and yellow wires on the Steering wheel adaptor to cure this

[Brownie_Corsa]

i had the same adaptors but i didnt change any wires on the adaptors i bought the only wires i changed round were the ones supplied with the hu

[Col]

Sorted!!!!!!!!!!!!