View Full Version : Door pins with LED'S
i take it they are just like normal door pins but how do the LEDS work, do they flash when you lock the car?
what do they need to be wired into?
wire them into what ever you want, if you ave an alarm wire them into the led for that
i dont have an alram, i take it they just need a Live feed and an Earth?
if you have a sri then you do have a factory fit alarm but if not i think conecting them to a live feed would work ..... i think
Something like that ??????????http://img133.imageshack.us/img133/1967/bild0496ii.jpg
no, i i meen........http://www.dcp-shop.co.uk/buy-car-accessories/product_info.php?cPath=142_408_1167&products_id=6313&osCsid=5657d61c4705e3178495e18d44fbee31
Jon-Astra-VXR
30-04-2006, 14:22
i would say wire them into the courstey light so wen u open the door they com on or the lights so wen u turn the lights on they com on :D
i would say dont wire them up at all, leave them in the bin where they belong
the idea is that they led flashed when the car is locked.
chris_trickle
30-04-2006, 21:24
i would say dont wire them up at all, leave them in the bin where they belong
To right, they're gay
If you're good with wires mate, make a simple contact between two wires, so when the door pin is down, a connection is made and the LED lights, when they pop up the circuit is broken thus stopping the LED? Lot of fannying about though, better with a flashin LED in the dash. :D
no, i i meen........http://www.dcp-shop.co.uk/buy-car-accessories/product_info.php?cPath=142_408_1167&products_id=6313&osCsid=5657d61c4705e3178495e18d44fbee31
SUCKS...
Sorry
ok iv given up on the idea no anyway
what u need 2do is wire one to the ignition live (ignition) and one to a permanent live (radio memory) this wont blow the LED as you might think. the LED's flash but when the ignition is turned on two lives cancel the current and the LED's cut out. Thus LED's flash when car is stationary and when driving their turned off. danny
Hi everyone.
Can I find it on ebay or anywhere else?
Please help.
Thnx.
http://img133.imageshack.us/img133/1967/bild0496ii.jpg
i would say dont wire them up at all, leave them in the bin where they belong
To right, they're gay
its designed as a theft deterent not for styling
Also I want it for styling :) :P
Can any1 answer if know???
Can any1 answer if know???
sorted
what u need 2do is wire one to the ignition live (ignition) and one to a permanent live (radio memory) this wont blow the LED as you might think. the LED's flash but when the ignition is turned on two lives cancel the current and the LED's cut out. Thus LED's flash when car is stationary and when driving their turned off. danny
vBulletin® v3.8.0, Copyright ©2000-2009, Jelsoft Enterprises Ltd.