View Full Version : speaker wires to the doors
when hooking up comps, how do u put the wires thru the doors via the connector blocks?
ermmm... you dont really...
the vxl wires are shyte. i drilled holes, and pushes some 16awg wire through :thumbs:
putting too much throught the standard wires could cause problems :\
i didnt say connecting them up, i was wondering how do u get some speaker wire from the car thru to the door, via the connector block, i dnt fancy drilling holes in the door
U can put up to 100W through the standard ones, wouldnt recommend more than that tho
vincefenlon
10-05-2006, 20:29
prob with the standard ones is unless you have quite small crossovers then your going to have probs as theres only 1 pair of cable going through the door as far as i remember, also you will have quite a few breaks in the cable and you could get interference. i would get a right angle drill bit and do it that way, get a black cap (forgotten the name!!!) and then just slot them near the big vx cable so its not noticeable.
any1\actually put it thru the connectors
matt_fallon
22-05-2006, 00:33
any1\actually put it thru the connectors
I have it took fookin ages from what i can remember!!
can u show me how to do it mate?
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.