PDA

View Full Version : Another Question Regarding Sub Box

SpeedX
10-05-2006, 21:30
Ok, I have kinda come to grips with my boot install, and just need to verify a few smalls things,
On a website, I found that we need between 1 cuft and 1.5 cuft volume, now I have a cardboard box here which is 2 cubft in volume but it appears smallish in size
Im going to build my boxes singlely rather than a twin enclosure (so my design fits together nicer) if this is a problem then please speak now.
So would a 2cuft box be sufficient for 1 RE SE 10" Sub, or would it need to be bigger/smaller??
Thank you in advance.
James
David
10-05-2006, 21:32
read the manual that came with the sub, tells you in there
SpeedX
10-05-2006, 21:32
read the manual that came with the sub, tells you in thereThe sub never come with a manual, it was just in a box on its own, with nout!
D4VO J
10-05-2006, 21:36
If its a sealed box, the volume really isnt that important
SpeedX
10-05-2006, 21:37
If its a sealed box, the volume really isnt that importantits ported, i still gotta work out the size/position of the port other than that im working out just the volume right now.
derbyboyred
10-05-2006, 21:59
well i would go with the recommended sizes 1-1.5 cubic feet (wierd unit)

and building the boxes seperatly will not be a problem just be careful how you amp and sey up the subs
Martin
10-05-2006, 22:07
ERMM... well this all depends on what size the actual port slot is? Did you get your sub through Blade ICE Uk distributors...?

and dont forget when you build the box/calculate the volume, you must subtract the volume(size) of the sub :thumbs:
SpeedX
10-05-2006, 22:10
what volume should I make 1 box for a RE SE 10"? Cheers m8