Quick Questions Regarding Enclosure

[SpeedX]

As I explained previously, I got a corsa 2005 and am in desperate need to advice.

I want to build the box working on these dimensions

12" Depth at bottom of enclosure and a maximum of 6" Depth at the top of the enclosure a hieght of 16" and a width of 23-24"

I kind of work that out to around 3 cubes (altho I was never good at math)

Then I have 12" of space to lay the amps flat on their arse under a sheet of perspex in my "false" floor and show the wiring that I want to.

Would it be best if I slanted the front of the box so as the subs face out towards the person who opens the hatch or not?

Remember I still need to put an "L" for the port,

this is for 2 x 10" RE SE Subs with a mounting depth of approx 6.5" and the port will come into the middle of the box between each sub.

also bear in mind im going to be using 18mm MDF so that is gonna use some space...

Please advise.
Thank You
James http://www.talkaudio.co.uk/vbb/images/smilies/cheesygrin.gif

[Martin]

thats not going to fit... i have one box for an SX12, and that just fits...

how do you fancy loosing the rear seats..?

[SpeedX]

thats not going to fit... i have one box for an SX12, and that just fits...

how do you fancy loosing the rear seats..?Sorry the width (or lengh) whatever from suspension leg to suspension let is 38" not 24" as I previously said.

Really dont want to lose rear seats!

[SpeedX]

oh and the false floor is going to come up 4" for the amps to go under therefore the sub box can be 16" tall but the subs have to go at least 1" above the false floor but I dont think it will be deep enough for the sub to go back, and the ports????