fitting 4 awg in the grommet

[Jason]

is it possible as the grommet looks like its really tight where the washer jet pipe goes thru, do u have to cut it?

[trixta]

Its possible to get 0 awg thru it....supposedly :P are you talking about the grommet behind the glove box?

[Jason]

yes have u done it

[trixta]

Ive been told it can be done

[SXi]

Hi mate I ahve done, you have to slice one side of the grommet so that it pulls of, then there is a big hole, just looks small with the grommit. I got 4awg through no promlem, just slea it up with bathroom sealant.

[Jason]

slice it? some people havent, how do i push it out anyway

[Coops]

I have got 4awg through there mate, was really easy.

Just pull the grommit with pliers or push it out from the inside, thats how i did it.

Stick a bit of washing up liquid (for lube :lol:) on the 4awg wire and push through.

Seal up with some mastick inside and out.

job done :thumbs:

[derbyboyred]

similar way to mine took the grommit out resealed the whole with a silicon sealent just as good

[Jason]

i was trying to get the wire thru the grommet for like 1 hr, so ended up cutting the grommet in 1/2 just so that it protects the washer jet line from rubbing against the metal and sealed it up with bathroom seal

[Coops]

I pulled the grommit out, and just left the wire against the metal. It had loads of insulation anyway and i put a ton of sealent on it so it didnt move. Also securly cable tied it either side so it cant move about at all.

Sorted :thumbs:

[EPIPHANY]

is 0wg the reall thich stuff.. because mine has that ;)

dont know anything else about how it was done lol.. the lad before me had it instlled by a local audiop place.. then sold the car after because of the insurance

[Jason]

i made sure the washer jet pipe was not against tthe metal, incase it bursts then u are proper fudged