loud thud/pop each time HU turns on

[Jason]

i get a looud thud/pop from the subs each time the HU turns on, i added an extra sub and it started happening, when i only had 1 sub it ddidnt

i have 4 guage into a fused distribution block of 30amps each, with 8 guage wire going into each amp

the earth is also 4 guage into 2 8 guages from a distribution block

i have daisy chained 1 amp to another using the AUX out

i have used a seperate wire and brisged it between the 2 amps for the remote

what is causing this?

[SONiC_86]

no idea but i used to get this with my old jbl system in the 106 :sleepy:

[EPIPHANY]

check the earth ;) and check the remote is in properly ;)

[EPIPHANY]

check the earth ;) and check the remote is in properly ;)

[Jason]

well its only the left sub making the thud, this remote for this amp is via a wire bridging the 2 amps, if u get what i mean?

the REM goes from HU to 1st amp, then i used a spare wire to bridge the REM from Amp 1 to Amp 2, and the sub connected to amp 2 is making the thud/pop each time HU come on

[trixta]

try having the remote wire from amp to HU connected to the 2nd amp instead, see if it makes a diference

[Coops]

check the earth ;) and check the remote is in properly ;)
Check you only have one post ;) :lol:

[Jason]

well i have sorted it, i have moved the RCA from the HU from the 1st amp to the other amp, and daisy chained the 2nd amp from the 1st 1, for some reason the guy said the 1st amp was either giving a signal that the 2nd amp didnt understand so it popped :/

[trixta]

what i sed :P

[Jason]

u said remote wire, i changed the rca :P

[trixta]

:p