View Full Version : Service message trick not working :(
^^^ As above. I have tried the tricks to reset the service light onmy car, having had it serviced at a none vauxhall garage. When i hold the button and turn the key, the dash shows "INSP ----" flashing on the display, i then turn the key off and remove it, but the "INSP ---0" still comes up. Advice please
you have to wait a while, a few seconds i believe.
have been trying every combo i can think of, even waiting up to 20 seconds. Has been like this for bout 2 months now :grr:
anyone?? or should i just go into vauxhall and get it sorted?
i don't know if this works but i heard that when u turn your car on press the reset button quickly then it should just come back up with the normal display
turn key to number 2
press and hold counter reset
turn key off
and back on
count to 10 (like 1thousand 2....)
let go of button and start car up
should b good...how we do them in work
vauxhall will probs charge... i no we charge 30 to reset service timer
turn key to number 2
press and hold counter reset
turn key off
and back on
count to 10 (like 1thousand 2....)
let go of button and start car up
should b good...how we do them in work
nope, still not working
vauxhall will probs charge... i no we charge 30 to reset service timer
rip-off merchants. will just have to live with it i guess. that sucks plums majorly
lol ok ill have look on autodata in work tomoz... im sure theres a couple of ways
like shorting something out in the OBD plug but the message never some back
will have to have a look 2moz 4ya
lol ok ill have look on autodata in work tomoz... im sure theres a couple of ways
like shorting something out in the OBD plug but the message never some back
will have to have a look 2moz 4ya
i dont really care if the message never comes back, it aint hard to count in 20's. cheers for ya help man :doublethumbs:
btw, it is an '05 SXI 13 months old with 26k on the clock!!
ok kool ill have a little look on auto data like i said... theres sure to be something
onechrisby
22-08-2006, 23:16
i got rid of mine buy,
hold down button,
put key in
turn key to on(not fireing up the car)
then switch off
thats what i did to mine and it sorted it!
Noddy16v
23-08-2006, 00:08
i got rid of mine by doing the sam as (onechrisby)
hold down button,
put key in
turn key to on(not fireing up the car)
then switch off
Andy_SRi
23-08-2006, 00:12
hmm dont short anything on obd port, not advisable, there is the paperclip method of getting fault codes etc....
I got full obd reader now & can reset engine warning lights etc, not sure if I can do service interval, if your going trax will give it a pop
hmm dont short anything on obd port, not advisable, there is the paperclip method of getting fault codes etc....
I got full obd reader now & can reset engine warning lights etc, not sure if I can do service interval, if your going trax will give it a pop
Cheers for the offer wallace, but am not going to Trax :(:cry: Too much stuff goin on at the mo. I think there must be a gremlin in my car who keeps on turning it back on.
on the facelift do you not have to press the brake pedal at some point?
winkywoo
28-06-2007, 22:04
hi reset mine by doin the usual stuff (ignition off trip button in ignition on count to 10 slowly! then press brake pedal) hey presto service light is reset!
hi reset mine by doin the usual stuff (ignition off trip button in ignition on count to 10 slowly! then press brake pedal) hey presto service light is reset!
Bang on matey this is how it done on the facelifts
http://www.clanbum.com/v6/e107_files/public/22_old_thread.jpg
jacko103
29-06-2007, 12:11
lol
Juan Pablo
29-06-2007, 12:16
http://www.clanbum.com/v6/e107_files/public/22_old_thread.jpg
Lol, ace.
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.