PDA

View Full Version : facia adaptor problem and question


partridge_88
08-12-2006, 18:19
alright lads ive got a problem I bought a bass controller off Greame and he said it would fit in the bottom compartment below the headunit.

It doesnt fit in mine but I know that there are TWO types, one with a large hole and one with a smaller one (mine)

where can I get this larger one? (current one is autoleads)

cheers

Martin
08-12-2006, 18:21
wasnt aware of this...

Martin
08-12-2006, 18:22
although IMO, id put the bass controller on ebay...

Ollie SXi
08-12-2006, 18:23
Large one is from vauxhall isnt it, but then again i have the large one and i think i got mine from halfords (but they sell autoleads dont they???) are you sure autoleads dont do two types?

Martin
08-12-2006, 18:23
ebay.. or the bin

Coops
08-12-2006, 18:37
although IMO, id put the bass controller on ebay...
Care to explain why...?

Martin
08-12-2006, 18:40
Care to explain why...?

i would say search... but ill explain...

gain isnt volume. gain is a potentiometer to match the amps volt level input to that of the HU level out put. So, the hu has a 4volt out put, you turn the dial to about 4 volts. simple... why on earth you want to have a bass controler, and turn the signal up i have no idea. it will cause the signal to turn into a sqaure wave and start clipping. you should set the gains, and then cut the knob off.

Coops
08-12-2006, 18:43
Cheers :thumbs:

Martin
08-12-2006, 18:44
no worries. i shouldve explained myself properly instead of just coming accross as an arragont dick

PaulSXi
08-12-2006, 20:35
i've got both in my hand right now; can catagorically say that the compartment on the Autoleads one is much bigger than the Vauxhall one!!!! Hope this helps