Angel dipped light alignment

[sxi007]

Any one know what height this should be set to on 0 setting?

Anyone one know what distance shouls each dipped light be form eachother?


Thanks in Advanced,

Purav

[JULE5]

Any one know what height this should be set to on 0 setting?

Anyone one know what distance shouls each dipped light be form eachother?


Thanks in Advanced,

Purav


If you can wait till middle of next week, ill try and get the measurements when i fit my HID's. But i cant guarantee it.

:thumbs:

[derbyboyred]

i just parked by a wall and took a guess i am afraid they seem ok on the road

[sxi007]

If you can wait till middle of next week, ill try and get the measurements when i fit my HID's. But i cant guarantee it.

:thumbs:


Will you be fitting Headlight washers to the car aswell, coz i think its illegal to have HIDs without these washers.


I may be wrong mind.

[JULE5]

Will you be fitting Headlight washers to the car aswell, coz i think its illegal to have HIDs without these washers.


I may be wrong mind.


there is a thread on this in the elctrical section:

http://www.corsa-c.co.uk/forum/showthread.php?t=65360.

Only factory fitted HID's need washers and auto levelling. But aftermarket dont need any of these as long as the levelling is correct.

I hope.

:lol:

[sxi007]

there is a thread on this in the elctrical section:

http://www.corsa-c.co.uk/forum/showthread.php?t=65360.

Only factory fitted HID's need washers and auto levelling. But aftermarket dont need any of these as long as the levelling is correct.

I hope.

:lol:

You gonna be fitting them to angel lights or the standar lights?

[JULE5]

You gonna be fitting them to angel lights or the standar lights?

facelifts. Not to keen on the angels, dont know why :?

[JULE5]

SXI007, do you know where abouts the adjustment screw is? Also can this be adjusted without dropping the bumper?

Cheers

:doublethumbs:

[sxi007]

SXI007, do you know where abouts the adjustment screw is? Also can this be adjusted without dropping the bumper?

Cheers

:doublethumbs:

Hey dude,

There is 2 things.

There is the metal bottle cap thing at the top that you can use to adjust up and down, i used a flat head screw driver to forceit to rotate once they were fitted.

At the centre of the lights there is a metal pole sticking out. This is used to adjust the light left and right, But the problem with this one is that the bumper will need to be taken off for this to happen.

[Ash]

mine are miles out lol

[aztec daz]

just fixed mines today and added some new bulbs. miles better but nowhere near as good as standard lights. I just used a philips head screw driver on the bottle cap thing 007 mentioned above. it takes around one full rev for it to move down about 5mil. its just trial and error. I spent all last night moving them up and down, but finally set them to a decent level today! Good luck with yours!

[JULE5]

Hey dude,

There is 2 things.

There is the metal bottle cap thing at the top that you can use to adjust up and down, i used a flat head screw driver to forceit to rotate once they were fitted.

At the centre of the lights there is a metal pole sticking out. This is used to adjust the light left and right, But the problem with this one is that the bumper will need to be taken off for this to happen.


Cheers mate, thats well helpfull :doublethumbs: . gonna give it ago myself if not down to the MOT station I go. :roll:

[sxi007]

Cheers mate, thats well helpfull :doublethumbs: . gonna give it ago myself if not down to the MOT station I go. :roll:


Good luck if you take it to the MOT station.

I took mine to mine and they refused to sort mine out as they would have had to take the head lights of the car adjust - fit then test the light beam over and over again until correct.

[Darren]

mine are miles out lol
Maybe we should sort it out??

[sxi007]

Hi guys,

I nicked this picture from the tutorial for the HIDs.

Should this HID light pattern be exactly the same for the normal bulbs in angels.

Coz i currently have to kickups on the left rather than the one on the picture below.

http://www.tzang.com/corsa/corsahidalign.jpg

[JULE5]

Good luck if you take it to the MOT station.

I took mine to mine and they refused to sort mine out as they would have had to take the head lights of the car adjust - fit then test the light beam over and over again until correct.


Daz_sxi works at a garage with MOt station. so might see what he can do. hes offered to give me a hand at the garage for fitting, might take a sat off and take him up on the offer.

im still trying to find a wall i can work near so i can mark up the original position and just realign to them. Bloody hills every where. :cry:

[sxi007]

Hi guys,

I nicked this picture from the tutorial for the HIDs.

Should this HID light pattern be exactly the same for the normal bulbs in angels.

Coz i currently have 2 kickups on the left rather than the one on the picture below.

http://www.tzang.com/corsa/corsahidalign.jpg

bump

[sxi007]

Hi guys,

I nicked this picture from the tutorial for the HIDs.

Should this HID light pattern be exactly the same for the normal bulbs in angels.

Coz i currently have to kickups on the left rather than the one on the picture below.

http://www.tzang.com/corsa/corsahidalign.jpg

Bump

[JULE5]

hello mate, had mine realligned yesterday. i have a kick up on the left like the pick and i got 6000K Hid's.

[lee_86]

mine are so out its unbelievable vision is pants and they wont adjust all the adjusters are fooked they turn but dont do anything,its all about standard prefacelifts for performance vision im afraid lol

[JULE5]

mine are so out its unbelievable vision is pants and they wont adjust all the adjusters are fooked they turn but dont do anything,its all about standard prefacelifts for performance vision im afraid lol


iv got facelift lights with 6000K HID. vision is amazing and looks like the new rangrover Hid's :yippe:

[lee_86]

iv got facelift lights with 6000K HID. vision is amazing and looks like the new rangrover Hid's :yippe:
lol well h.i.ds are an exception

[sxi007]

mine are so out its unbelievable vision is pants and they wont adjust all the adjusters are fooked they turn but dont do anything,its all about standard prefacelifts for performance vision im afraid lol


The vision on my angels are fine and clear and the do adjust but i need to know what is the correct height etc to pass the MOT for normal bulb lights.

[MartoSRI]

I ave alligned my angels up properly and there fine now, got upgraded lights on there way to now

[sxi007]

I ave alligned my angels up properly and there fine now, got upgraded lights on there way to now


So what height etc is your beams set to?

[MartoSRI]

The motors cant be in properly cos they dont change correctly and aint measured height but seems fine and vision is ok, not great but liveable.