PDA

View Full Version : Total Closure Kit problem

MattH
13-06-2007, 11:57
My total closure kit from Lmf has just arrived and i tried to install it using tutorial but it is different kit and i cant seem to get mine working. I have 6 wires on my kit,
1) Black & white
2) Black
3) Red
4) Orange
5) Yellow
6) Brown

The instrucions make no sense to me. Can someone help please. Also my car has an alarm don't no if that will make any difference?
nyzrox
13-06-2007, 11:59
ID have a wild guess.

1) =
2) = GND?
3) = 5v?
4) =
5) = 12v?
6) - GND?
MattH
13-06-2007, 18:43
Anyone else?
MattH
14-06-2007, 15:54
Someone must have used this total closure before?
On instructions it says:
Orange wire is 87A Normally Closed
Brown 87 Normally open
Yellow 30 Common
Black & White stripe is Trigger input
Black is ground
Red is +12 VDC Ground

all i need to know is which colour wires on car to wire each to, please can some1 help
MattH
17-06-2007, 09:12
bump
Hoops
17-06-2007, 11:23
Am getting my kit delivered on tuesday along with instructions so may be able to help then....
MattH
17-06-2007, 23:14
Am getting my kit delivered on tuesday along with instructions so may be able to help then....

Alright cheers if you can figure it out would be great if you could tell me because i have no clue
Hoops
19-06-2007, 08:37
According to David over @ TotalClosure.com -

New wire - Current wiring

Brown - Red/Yellow
Blue - Blue/Black
Short Red - Grey/White
Black - Brown
Long Red - thick Red
MattH
19-06-2007, 09:35
What kit did you get? mine are different wires to yours
MattH
19-06-2007, 09:41
Do you know what the colour of the wires in the car actually do, for example which is to make windows open and which to make windows close?
big1gavman
06-09-2007, 17:18
are you still having problems? I can help a little i think if so?
jake
06-09-2007, 17:25
theres a god damn tutoriol sumwhere with easy pics
Hoops
06-09-2007, 17:33
theres a god damn tutoriol sumwhere with easy pics

He has different coloured wires so its not so clear cut as you might think ;)
lee_86
06-09-2007, 17:35
ive just ordered a kit from lmf just wanted to know if the tutorial was for this kit ?
cheers .lee
MattH
06-09-2007, 21:36
I never found fitted it as couldn't get it to work, if you get yours to work let me know how you wired it up :thumbs:
MattH
06-09-2007, 21:36
are you still having problems? I can help a little i think if so?

I would love for your help, any ideas?
lee_86
07-09-2007, 18:08
I never found fitted it as couldn't get it to work, if you get yours to work let me know how you wired it up :thumbs:
k m8 will do
big1gavman
08-09-2007, 20:12
Someone must have used this total closure before?
On instructions it says:
Orange wire is 87A Normally Closed
Brown 87 Normally open
Yellow 30 Common
Black & White stripe is Trigger input
Black is ground
Red is +12 VDC Ground

all i need to know is which colour wires on car to wire each to, please can some1 help

Well like you said, that sounds right, just need to know what wires are which on corsa

ive just ordered a kit from lmf just wanted to know if the tutorial was for this kit ?
cheers .lee

when you get yours, can you send all information that you get with it? eg. trigger, +12v, 0v, output, use a multimeter to test lines as you go along.......... Then we can match them up.

Other than that i would take test the wires quoted above for lmf one with a multimeter and post results, test with multimeter and lock car (deadlock) to find out the trigger, get a friend to put up window with keys to find output, then all you need is +12v and 0v,

that any help?