[mamonem]

"Hi I've identified that I need a new Wiper Motor for the Front Windscreen (Corsa C - 2004 1.2 SXI). The TIS says "Before attaching the crank to the wiper motor, connect the wiper motor
electrically and move to limit position. Ensure the crank is in the correct position" but I've no idea what that really means. I can connect the motor but what does "move to the limit position mean", and then "crank in the correct position" - doesn't help a newbie like me !? Please help, thanks in advance

 

[robins2409]

Basically the linkage needs to be in the 'park' position when you bolt the motor on. If you connect the motor while you do this it should also be in park

 

[Phillip13]

The little arm on the end of the linkage that attaches to the motor spindle must be lined up with the lines and arrows on the aluminium plate that the motor attaches to .There are Mark's and "RH" stamped in to the plate ,the little arm must sit between these Mark's and arrows ,hope that makes sense,if you don't line it up properly then the wipers won't return to the PARK position

 

[andy-v]

old thread, sure they have it sorted by now