[rowl3y]

hi guys need some major help. i have a 1.0 c club ...

im wanna fit the ele motor's in the car but i need some help ..

would i need to drill the holes for the motors and runner's or will they be pre drilled as i thort all the dorrs was made for everythink ..

please help

 

[rowl3y]

anyone help me on this

 

[rowl3y]

thanks guys

 

[samisnake]

what you might need to do is drill out the rivets for the guide rail and motors on the door. then refit the new things in and rivet them in. had a look in my haynes manual for you, and it shows to take out the regulator, you have to drill the rivets out

to drill the regulator out, you gotta use an 8.5mm drill bit. to replace the rivets you need rivets which are 11mm long and the head should be 4.8mm in diameter.
you wont need to drill new holes by the looks of it, just a case of drilling out the rivets, then swapping the mechanisms over, although ive read that you might need a tech 2 to get it working, and that a wire is sometimes missing on cars that dont have elec windows as standard. guess ull have to try it to find out

 

[krisj]

thanks guys

dnt b like that ppl will reply give them time

 

[rowl3y]

ok thanks guys this is just gonna be one of them

 

[rowl3y]

some one said they will fit everythink i just gotta get everythink now lol