Hello guys, new to this page, am in need of any advice.
I replaced my steering column along with the brake pedal and clutch pedal (and now the accelerator pedal has been changed and swapped back) and found some wires were a bit knackered so I sorted them out with a good bit of solder.
Now...
hi all.
im a first time (female) driver and my dad has bought me an 04 corsa 1.2 petrol. i love it, BUT....lol, i wish to change the headunit for a better one with an aux port / usb / bluetooth / wireless etc, can anyone recomend one and provide the link , that will be a straight swap...
i know theres a fuse guide already but while i was doing a relay guide i thought i might as well add the number fuses on as well
will see if i can do the one for under the bcm housing later
R = RELAY
there is a table under the picture above to say what relay does what
and heres the fuse...
Hi, I've been working on the various electronics on my Corsa C recently. When I was doing stuff with the headunit, I realised the official Vauxhall wiring diagram numbering system was different to that of the ISO10487 standard. So I knocked up this conversion table to help me map the two...
Needed parts:
- GID or CID, if Siemens VDO, minimum, firmware version 49. Facelift model. If Grundig, any version firmware version
- UHP4 module, I had GM 13403828
- UHP4 plug
- any original GM microphone
- microphone trim GM 24461582, 24403106, 13149794, 24469993 (this codes have the alarm...
A forum community dedicated to Vauxhall Corsa owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, parts, maintenance, and more!
