Programming BCM

Jamoi · Jun 30, 2020

I've been battling my Holden Barina (Corsa C) for the last couple of years and eventually gave up on it and left it in the barn. I now need the space back so I'm having another crack at getting it going again.

I finally got a working OP-COM cable and software and the errors I've got are the common P1615, P1616, U2107 etc. Reading the forums it looks like extended periods with a flat battery could mean the BCM needs resetting.

Before I go ahead and break something, would someone have the steps to reprogram it?

Cheers

liviu2004 · Jul 1, 2020

Don’t reset anything!
Make a list, what faultcode is in every module, per module. Post here before you touch any other button in opcom.

Jamoi · Jul 7, 2020

Here's the list of error codes I'm getting in the Engine module - shall we play error code bingo? ;-) :

P1615 - Wrong Vehicle ID from Body Control Module
(00) - Present

P1616 - Wrong Vehicle ID from Instrument Control Module
(00) - Present

U2107 - CAN-Bus no Communication with Body Control Module
(00) - Present

P1483 - Fan Relay 3 Signal Low / Open Circuit
(04) - Present

P0230 - Fuel Pump Relay Voltage Low
(04) - Present

P1230 - Main Relay Stuck Closed
(0B) - Present

P1230 - Main Relay Stuck Open
(0A) - Not present

P1612 - Immobiliser No Or Wrong Signal
(00) - Not present

P1613 - Immobiliser No Or Wrong Signal
(00) - Not present

P0650 - Malfunction Indicator Lamp Voltage Low
(02) - Not present

P0230 - Fuel Pump Relay Contact Problem
(00) - Not present

P0460 - Tank Level Sensor Circuit High Input
(01) - Not present

tyraines · Dec 30, 2021

was this ever fixed ? looks like my code list!

liviu2004 · Jul 18, 2020

Faulty engine ecu? Is the z14xe engine?

Programming BCM

Top Contributors this Month

Recommended Communities